ProLights VORTEX VXBUBBLE, User Manual

Page: 24 / 28

10
VXBUBBLE
2.9 Troubleshooting
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps. If the problem persists, refer servicing to a qualified technician.
Power connected but no BUBBLE is emitted:
1. Check the BUBBLE fluid in the tank.
2. Check the power supply. Plug the unit into grounded electric power supply socket with proper voltage.
3. Check your controller connection.
4. Check DMX setup.
5. Disconnect BUBBLE machine from electric power supply. Replace fuse with one of the same type.
2.8 DMX control
Channel Function
DMX
value
1
BUBBLE OUTPUT
No function
Volume
000-005
006-255