17
SUNBLAST3500MAX
Off
- The brightness increase is linear.
Dimmer 1
- Light intensity control is finer at low level and coarse at high levels.
Dimmer 2
- Light intensity control is finer at high level and coarse at low levels.
Dimmer 3
- Light intensity control is finer at low and high levels, and coarse to medium levels.
-
Temperature
- Through the
Temperature
function can be displayed the temperature inside the fixture,
near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.7 LAMP SETTINGS
Factory Reload
Select this function to reset the unit to factory settings:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Advanced
icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Factory Reload
and press the ENTER button
to enter the next menu.
• Press the UP/DO WN button to select
ON
or
OFF
, then press the ENTER button to confirm.
3.8 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
-
Fixture Time
- Through the Time Information function you can display the operating time of the
projector.
-
Temperature
- Through the Temperature function can be displayed the temperature inside the fix-
ture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
-
Fans Speed
- Through the Fans Speed function you can show on display the fan speed present near
the lamp. Velocity is expressed in RPM (revolutions per minute).
-
Software Version
- Through Software Version function you can display the currently installed software
version.
• Press the LEFT button repeatedly to exit the menu.
3.9 OPERATIONS IN AUTOMATIC MODE
SLAVE RECEIVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
The Slave unit receives data from the Master unit according to the group which the Slave unit was as-
signed to.
For example, if a slave device is set to Receive Part 1, the Master unit Slave unit will send the automated
Chase Part 1; if set to Receive Part 2, the Chase Part 2 Slave units will receive from the Master.
To set the drive as a slave, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
StandAlone
icon, then press the ENTER button
to enter the next menu.
Summary of Contents for SUNBLAST3500MAX
Page 1: ...MANUALE UTENTE USER MANUAL SUNBLAST3500MAX LED STROBE IT EN...
Page 46: ......
Page 47: ......
