ProLights SmartBook, User Manual

Page: 15 / 40

13 SMARTBOOK
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
3. 15 MODALITÀ MASTER/SLAVE
Once set in static or auto programs, this mode allows the SMARTBOOK to return to the slave setting.
• Press the MENU button so many times until STAND ALONE shows on the display, then press ENTER.
• Press UP/DOWN and select the mode (
MASTER, SLAVE
) to set the unit as slave. Press the ENTER button to
confirm.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
3. 16 EFFECTS
The unit has preset pre-programmed effects that can be set through the following procedure:
• Press the button MENU so many times until the display shows STAND ALONE, then select EFFECTS , then
press the button ENTER
• Throught the UP/DOWN button select the the desired effect.
• Use the UP/DOWN button select the desired effect [Effetto 1, 2, 3, 4, 5] and the value (001 - 100).
• Premere il tasto ENTER per salvare l’impostazione.
3. 17 STATIC MODE
The unit allows you to create configurations that can be set by the following procedure:
• To enter static mode, press the MENU button repeatedly until STAND ALONE shows on the display, next
select
STATIC
, then press ENTER to confirm.
• Through the button UP/DOWN select FIXED COLOR or MANUAL COLOR and press the ENTER button to confirm
the desired function.
• Set the color and values ( 000 - 255 ), using the UP/DOWN button, then press ENTER button to confirm.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.