27
RUBY
3.16 WIRELESS CONTROL SETTINGS
To enable wireless control mode, proceed as follows:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button to scroll the menu, select the
Connect
icon, then press the ENTER button to
enter the next menu.
•
Press the UP/DOWN button to scroll through the menu, select
Wireless DMX
and press ENTER.
•
Press the UP/DOWN and LEFT/RIGHT buttons to select the desired value (
001-512
).
•
Press the ENTER key to confirm the setting.
To change the settings of wireless control, proceed as follows:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button to scroll the menu, select the
Set
icon, then press the ENTER button to enter
the next menu.
•
Press the UP/DOWN button to scroll through the menu, select
Wireless Set
, and press the ENTER button
to enter the next menu.
•
Press the UP/DOWN button to select the option proposed and press the ENTER button to confirm your
choice.
-
DMX On Cable
- Disable/enable the DMX signal cable. Select
OFF
to deactivate or
ON
to activate the
function.
-
Reset Connect
- Reset the wireless connection of the unit. Select
OFF
to deactivate or
ON
to activate the
function.
•
Press the ENTER button to confirm your choice.
•
Press the LEFT button repeatedly to exit the menu and save changes.
3.17 FIXTURE SETTINGS
You can change the parameters for the device by following these steps:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button to scroll the menu, select the
Set
icon, then press the ENTER button to enter
the next menu.
•
Press the UP/DOWN button to scroll through the menu, then select
Movement
and press the ENTER but-
ton to enter the next menu.
•
Use the UP/DOWN button to select the option proposed and press the ENTER button to confirm the
setting.
-
Pan Reverse
- Pan rotation in the opposite direction. Select
OFF
to deactivate the function (normal set-
ting);
ON
to activate the function (Pan Reverse).
-
Tilt Reverse -
Used for reversing tilt movement. Select
OFF
to deactivate the function (normal setting);
ON
to activate the function (Tilt Reverse).
-
Pan Degree -
Angle of Pan. Select
540°
or
630°
to set the maximum angle of rotation of the moving head.
-
Encoders -
Reorganization Pan/Tilt position after rolling away. Select
OFF
to deactivate or
ON
to activate
the function.
-
Pan/Tilt Mode -
Type of movement of the moving head. Select
Standard
to obtain a fast and fluid move-
ment of Pan/Tilt,
Smooth
for a slower and softer movement of Pan/Tilt.
•
Press the ENTER button to confirm your choice.
•
Press the LEFT button repeatedly to exit the menu and save changes.
3.18 LAMP SETTINGS
You can change the parameters of the device lamp by following these steps:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button to scroll the menu, select the
Lights
icon, then press the ENTER button to
Summary of Contents for Ruby
