ProLights QUADRO18UTRI, User Manual

Page: 29 / 44

9
QUADRO18UTRI
3.3 MENU STRUCTURE
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [ P-- ]
• Press the button UP/DOWN to switch between the programs (
P1-P14
), then press the button ENTER.
The unit will operate in automatic mode.
NOTE - Programs P1 - P14 are fully pre-programmed and will not be altered by changes in EDIT mode.
You can set the speed of execution of automated programs.
• Press the button MENU so many times until the display shows [ S-- ]
• Using the button UP/DOWN, select the desired run speed (slow-fast)
[S1 - S100]
.
• Press the button ENTER to confirm.
MENU
1
DMX Personality and
Starting Address
3 CH
ð
d1 - d512
Selects DMX personality and DMX starting
value
2
5 CH
ð
d1 - d512
3 9 CH
ð
d1 - d512
4 13 CH
ð
d1 - d512
5 Static Colors
C--
ð
C1 - C18
6 Auto Programs P--
ð
P1 - P14 Selects 1 of 4 auto programs
7 Programs Speed
S--
ð
S1 - S100 Sets auto program speed (slow to fast)
8 Sound Active Snd
ð
Snd Selects Sound Active mode
9 Sound Sensitivity
SenS
ð
u0 - u100 Sets sound sensitivity (low to high)
10 Custom Color Mixing U--
ð
r0 - r255 Red (0-100%)
ð
g0 - g255 Green (0-100%)
ð
b0 - b255 Blue (0-100%)
11 Dimmer dIM
ð
OFF OFF: Dimmer speed off
ð
dIM1 DIM1: Dimmer speed fast
ð
dIM2 DIM2: Dimmer speed middle
ð
dIM3 DIM3: Dimmer speed slow
12 Temperature Temp Temperature
13 Infrared SET
ð
ON
Turns infrared on or off
ð
OFF