9
PIXBAR 4
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
•
Press the button MENU so many times until the display shows [
AUTO SHOW
], then press the button ENTER.
•
Press the button UP/DOWN to switch between the programs (
AUTO 0 - AUTO 9
or
FADE
). The unit will oper-
ate in automatic mode.
NOTE - Programs
AUTO 9 - AUTO9
are fully pre-programmed and will not be altered by changes in EDIT mode.
3.5 MASTER/SLAVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
•
Press the button MENU so many times until the display shows [
MASTER/SLAVE
], and press the button
ENTER to confirm.
•
Press UP/DOWN to set the unit as [
SLAVE
].
•
Select the desired program (see section 3.4).
•
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units. For longer cable runs we suggest a terminator at the last fixture (see page 11).
Info
Fixture Hours
Version
DMX ADDRESS
DMX address
001 - 510
DMX CHANNEL
DMX channel
3 Ch
5 Ch
7 Ch
12 Ch
MASTER/SLAVE
Master/Slave
Master
Slave
WHITE BALANCE
Balance
R=125-255
G=125-255
B=125-255
FAN SPEED
Fan Speed
Auto
High
TEMPERATURE
Temperature
