GHOST GH500H
8
2.3 INTERVAL SET MODE
When the unit is under “READY TO HAZE” state, press the FUNCTION button once, the LCD screen shows
INTERVAL SET. Use UP/DOWN button to adjust the interval of timer, which can be set from 1 to 200 seconds
2.4 DURATION SET MODE
When the unit is under “READY TO HAZE” state, press the FUNCTION button twice, the LCD screen shows
DURATION SET. Use UP/DOWN button to adjust the duration of timer, which can be set from 1 to 200
second
2.5 VOLUME MODE
When switching the GHOST GH500H, the characters, “READY TO HAZE”, will be displayed on the LCD
screen. Pressing VOLUME button once can activate the hazer and the LCD screen will display “WORKING”.
Press the VOLUME button again will cease hazing and the LCD screen will display “READY TO HAZE”. Under
“READY TO HAZE” mode, to keep pressing MANUAL button can make the hazer produce haze(LCD screen
shows “WORKING”) while releasing MANUAL button will stop hazing(LCD screen shows “READY TO HAZE”).
Finally, under this mode, press TIMER button, the timer will be triggered.
2.6 DMX MODE
When the unit is under “READY TO HAZE” state, press the FUNCTION button three times, the LCD screen
shows DMX 512. Use UP/DOWN button to adjust the DMX address, which can be set from 1 to 512. The
GH500H use 1 channel to control volume output operation.
CH Function in 1 channel mode
Value
1
VOLUME SMOKE OUTPUT
Off
On
000 - 249
250 - 255
2.7 CONNECTION OF THE DMX LINE
DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-
ance and low capacity.
The following diagram shows the connection mode:
DMX - OUTPUT
XLR socket
DMX - INPUT
XLR plug
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin4 : N/C
Pin5 : N/C
Fig.4
