PANORAMAIPWBX
10
3.4 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.5 DMX MODE
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Connect
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the
DMX Address
and press the ENTER key.
• Press the arrow keys to select the desired value (
001-512
).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.6 DMX CONFIGURATION
The PANORAMAIPWBX has 8 DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Set
icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Users
and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
User Mode
and press ENTER to confirm
your choice.
• Use the UP/DOWN button to select the desired DMX channel configuration (
1st WASH/1st FX/ 1st PIXFX/1st
RINGS/ 2nd WASH/2nd FX/ 2nd PIXFX/2nd RINGS/ User
), then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The tables on page 13 show the mode of operation and their values DMX.
The unit is equipped with 5-pole XLR connections.
Edit User
The
Edit User
, in the same menu, allows you to create a profile of personalized functions. You can change
the parameters of the various functions (Control, Pan, Tilt, etc.). Once you’ve created your custom profile,
you can use it by selecting the USER mode as described above.
3.7 DMX ADDRESSING
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to PANORA-
MAIPWBX. To able to operate the PANORAMAIPWBX with a light controller, adjust the DMX start address
for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of
the first DMX channel, adjust the start address 33 on the PANORAMAIPWBX. The other functions of the
light effect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Summary of Contents for PANORAMAIPWBX
Page 1: ...EN IT USER MANUAL MANUALE UTENTE MOVING HEAD PANORAMAIPWBX...
Page 66: ......
Page 67: ......
