9
MINIECLIPSE - MINIECLIPSETR
- 2 - INSTALLATION
2.1 MOUNTING
MINIECLIPSE/MINIECLIPSETR is designed for applications in exhibition areas, commercial spaces, muse-
ums, restaurant, churches, and any other installation where size is an important factor. For fixing, stable
mounting clips are required. The mounting place must be of sufficient stability and be able to support a
weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
•
Install the projector at a suitable location.
•
Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
•
Adjust the projector and use the knobs.
NOTE - For the installation of the MINIECLIPSETR make sure that the ridge of the adaptor is in with the
groove of the track. Turn knobs 90° to connect the adaptor to the circuit. Please see the below instructions.
Fig.4
1
2
3
Summary of Contents for MINIECLIPSE
Page 13: ...Note ...
Page 27: ......
