LUMIPIX8H
12
3.8 DMX CONFIGURATION
LUMIPIX8H is equipped with different DMX configuration.
•
Press the button MENU so many times until shows
[CHANNEL]
, and press the button ENTER to confirm.
•
Select the desired DMX configuration (
3CH - 6CH - 8CH - 12CH - 48CH - 53CH
) through the buttons UP/DOWN.
The tables on page 14 indicate the operating mode and DMX value. The LUMIPIX8H is equipped with 3/5-
pole XLR connections.
3.9 DMX MODE
•
Press the button MENU so many times until the display shows
[ADDRESS]
, and press the button ENTER
to confirm.
•
Press UP/DOWN button to select the desired value (
001-501
). Press and hold to scroll quickly.
•
Press ENTER button to store.
•
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the LUMIPIX8H with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LUMIPIX8H. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
8
33
33-40
41
49
57
DMX512 Controller
DMX Address: 33
DMX Address: 57
DMX Address: 41
DMX Address: 49
. . . . . . . . . . . .
Example 8 DMX channels configuration
Fig.4
Summary of Contents for LUMIPIX8H
Page 1: ...MANUALE UTENTE USER MANUAL LUMIPIX8H IT EN LINEAR LED BATTEN...
Page 23: ......
Page 47: ......
