ProLights LUMIPAR7QPRO, User Manual

Page: 26 / 40

LUMIPAR 7QPRO
8
STANDALONE
This fixture has several options for operating without a DMX controller. Access these options via the con-
trol panel on the back of the fixture.
3.4 AUTOMATIC
This fixture has preprogrammed chases that may be triggered without a controller. Access these chases
via the control panel on the back of the fixture.
• Remove any DMX controller from the fixture.
• Press the button MENU so many times until shows [Show Md] , and press the button ENTER to confirm.
• Select the program [Sh 1 - Sh 5] through the buttons UP/DOWN. Press the button ENTER to confirm.
• Select the desired run speed (slow~fast), through the buttons UP/DOWN [Speed 000 - Speed 100] .
• Press the button ENTER to save the setting.
3.3 MENU STRUCTURE
MAIN FUNCTION SELECTION SUB-SELECTION DESCRIPTION
DMX Address Addr 001 - 512 DMX starting address selection
Personality
Channel
10CH
10 - channel operating mode: Dimmer, RGBW, macro, strobe,
auto, auto speed, dimmer curve
6CH 6- channel operating mode: RGBW color mixing with dimmer
4CH 4 - channel operating mode: RGBW color mixing
Master/Slave
M&S Md
Master
Master/Slave mode
Slaver
Show mode
Show Md <Sh1 - Sh5> Speed 000 - 100 Program selection, Run speed
Show Md <Fix c>
R-G-B-W-GB-RB-RG-
-RGB-RW-GW-BW-
RGW-RBW-GBW-RGBW
Preset color
Show Md <MaunC>
R000 - R255 Red
G000 - G255 Green
B000 - B255 Blue
W000 - W255 White
Dimming Curve
Dimme Md
OFF Dimmer off
Mode 1 Dimming curve: dim1 (fast)
Mode 2 Dimming curve: dim2
Mode 3 Dimming curve: dim3 (slow)
Backlight
Back L
ALL
Backlight display
10 S
20 S
30 S
Test Auto Test Auto test
Info
Fixture 0001h Fixture use time
Version V1.0 Info version default