manualshive.com logo in svg

ProLights LUMA1500SP, User Manual

Share
Download
ProLights LUMA1500SP User Manual Download Page 32

LUMA1500 SP

30

Calibration

Select this function to calibrate and adjust the wheels of the effects in their correct positions:
•  Press the ENTER button to access the main menu.
•  Press the UP/DOWN button keys to scroll the menu, select the 

Advanced

 icon, then press the ENTER but-

ton to enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

Calibration

 and press the ENTER but-

ton to enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

Password

 and press ENTER to con-

firm.

•  Use the arrow keys to enter the password 050 and press ENTER to confirm.
•  Once you have entered your password, you can set the values   for 

Pan, Tilt, Color1, Gobos1, Prism, Focus

. Press 

the UP/DOWN button to scroll through the menu, select one of the functions mentioned above and 
press ENTER to confirm your choice.

•  Use the arrow buttons to enter the desired value, then press the ENTER button to confirm your choice.
•  Press the LEFT button repeatedly to exit the menu and save changes.

Reload Default

Select this function to reset the unit to factory settings:
•  Press the ENTER button to access the main menu.
•  Press the UP/DOWN button to scroll the menu, select the 

Advanced

 icon, then press the ENTER button 

to enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

Reload Default

 and press the ENTER button 

to enter the next menu.

•  Press the UP/DOWN button to select the favourite recovery mode 

Basic Reload/Program Reload/Private 

Reload/All Reload

, then press the ENTER button to confirm.

•  Press the UP/DOWN button to select 

ON

 or 

OFF

, then press the ENTER button to confirm.

3.21 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:
•  Press the ENTER button to access the main menu.
•  Press the UP/DOWN button to scroll the menu, select the icon 

Information

, then press the ENTER button 

to enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select one of the following information 

and press the ENTER button to display it.

 -

Time Information

 - Through the

 Time Information 

function you can display the operating time of the 

projector.

 -

Temperature

 - Through the 

Temperature

 function can be displayed the temperature inside the fixture, 

near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.

 -

Fans Speed

 - Through the 

Fans Speed

   function you can show on display the fan speed present near the 

lamp. Velocity is expressed in RPM (revolutions per minute).

 -

Channel Value

 - Channel Value function can be used to display the values   of the channels by which 

the unit will operate when switched on.

 -

Error Message

 - Through the 

Error Message

 function can be displayed any errors channels.

 -

Fixture Model 

- Through the 

Fixture Model

 function can be displayed the model number and manufac-

turer.

 -

Software Version

 - Through 

Software Version

 function you can display the currently installed software 

version.

•  Press the LEFT button repeatedly to exit the menu.

Summary of Contents for LUMA1500SP













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands