7
LEDPAR64188 4 IN 1
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (240 V~/50 Hz). Then the unit is ready for operation and can
be operated via a DMX controller or it independently performs its show program in succession. To switch
off, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and off via a light switch.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the LED Display
(fig.3).
NOTE - Never wait for more than 20 seconds to press the next button, otherwise the procedure for setting
enter into stand-by mode.
Fig.3
MODE
SETUP
UP
DOWN
Pressing this button,
can select the operating
mode: AUTO - DMX -
SLAV - SOUN - PR
Button to acces the settings
of different operating
modes
Navigates downwards
through the submenu list
and increases the numeric
value when in a function
Navigates upwards through
the submenu list and
decreases the numeric
value when in a function
MODE SETUP
UP
DOWN
Summary of Contents for LEDPAR641884IN1
