ProLights GHOST GH350H, User Manual

Page: 20 / 28

GHOST GH350H
6
Fig.2
MENU UP/TIMER DOWN/ON STOP
For setting different
functions Button to increase the numerical
values and enable the emission of
smoke on the parameters of the
desired interval and duration Button to decrement the
numerical values and confirm
the function or operation
within a menu To stop the operation
TIMER ON
- 2 - FUNCTIONS AND SETTINGS
2.1 OPERATION
Note that haze machines develop condensation around the output nozzle. This may result in moisture ac-
cumulation on the surface below the output nozzle. Consider this condensation when installing the unit.
All haze machines may sputter small amounts of fog occasionally during operation and for a minute or so
after being turned off. The led lights upon the haze machine after being plugged in properly. After a few
minutes of warm-up time, the haze machine will be in “ready to fog” condition.
ADD PROLIGHTS FLUID IN TIME IF THE SMOKE MACHINE KEEPS RUNNING WHEN IT HAS RUN OUT OF
FLUID. ITS PUMP WILL BE DAMAGED!
Place the unit on a horizontal surface;
• Unscrew the tank cap.
• Fill up the fog fluid container (ProLights). If any fluid is spilt, wipe it off immediately with a dry cloth. It
must not get inside the unit.
• Make sure the fluid level does not exceed the indicator outside the housing.
• Tightly close the tank. Plug main power cord from the fog machine into the appropriate power supply
socket and set the power switch to “ON” (8). Wait a few minutes for heating element to heat up.
WARNING - while filling up the fluid container Prolights, the unit must not be connected. Disconnect the
main plug from the socket first!
The unit is not splashproof. If fluid accidentally gets inside the unit, do not set the haze machine into op-
eration; it must be cleaned and checked by skilled personnel first.
2.2 BASIC
The haze machine GHOST GH350H has a LCD display and 4 button used to access the control panel func-
tions and manage them (fig.2).