11
GHOST GH080F
- 3 - MAINTENANCE
3.1 TROUBLESHOOTING
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the
steps below in sequence until a solution is found. Once the unit operates properly, do not carry out follow-
ing steps. If the problem persists, refer servicing to a qualified technician.
Problems
Possible causes
Checks and remedies
Unit powers up but it generates
no haze
•
Hazer is still cold
•
Wrong fluid
•
Lack of fluid
•
Faulty pump
•
Wait until hazer is ready to operate
•
Clean the hazer and use approved fluid
•
Follow the fluid replenishment procedure
•
Send unit for repair
Haze comes out but it is too
thick/thin
•
Erroneous haze volume adjustment
•
Wrong fluid
•
Faulty pump
•
Adjust haze volume as explained
•
Clean the hazer and use approved fluid
•
Send unit for repair
Unit does not power up
•
No power
•
Loose or damaged power cord
•
Faulty internal power supply
•
Check for power on power outlet
•
Check power cord
•
Replace internal power supply
Fixture does not respond to
DMX
•
Wrong DMX addressing
•
Damaged DMX cables
•
Bouncing signals
•
Check control panel and unit addressing
•
Check DMX cables
•
Install terminator as suggested
