EVO90F
12
Fig.7
3.8 DMX CONFIGURATION
EVO90F is equipped with different DMX configuration.
•
Press the button MENU so many times until shows
[SET]
, and press the button ENTER to confirm.
•
Press the button UP/DOWN to select
[PERS]
, and press the button ENTER to confirm.
•
Select the desired DMX configuration
[UNO, DOS, STD.P]
through the buttons UP and DOWN.
The tables on page 13 indicate the operating mode and DMX value. The EVO90F is equipped with 3/5-poles
XLR connections.
3.9 DMX ADDRESSING
•
Press the button MENU so many times until the display shows
[ADDR]
, and press the button ENTER to
confirm.
•
Press UP/DOWN button to select the desired value (
001-512
).
•
After the setting value is automatically saved.
To able to operate the EVO90F with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the EVO90F. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
2
33
33-34
35
37
39
3
33
33-35
36
39
42
DMX Address: 33
DMX Address: 42
DMX Address: 36
DMX Address: 39
Example 3 DMX channels configuration (STD.P mode)
DMX512 Controller
. . . . . . . . . . . .
Summary of Contents for EVO90F
