9
EVO 190E
3.4 DIMMER MODE
This mode allows the user to manually control the intensity of the fixture:
•
Press the button MENU so many times until shows
[DIM],
and press the button ENTER to confirm.
•
Press the button UP/DOWN to select
[Fix c]
then press ENTER to confirm.
•
Using UP/DOWN button, select the desired value
[d.000 - d.100]
•
Press ENTER button to confirm.
3.5 SPECIAL FUNCTIONS
•
Press the button MENU and select through the directional buttons the
[SET]
mode; and press the button
ENTER to confirm.
It is possible to view to following functions:
KEY
•
Enter the
[KEY]
mode to select whether the access password is on or off.
•
Select
[ON]
or
[OFF].
When the fixture is set as pass
[ON],
after 30 seconds or turn on the fixture next time, the fixture will
need an access password to enter the display menu control.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
DIM
Enter to
[DIM]
to select specific dimming curve. When dimmer is set to
[OFF]
, the dimmer is linear.
DIM1/2/3/4
are speed modes of the linear dimmer;
[DIM1]
is the faster, while
[DIM4]
is the slowest.
CURV
Enter to
[CURV]
to adjust the shaèe of the dimming curve. See the CURV chart to understand more
about actual dimming curves:
CURV dimming
1: OFF
2: CV1
3: CV3
4: CV4
Fig.4
Summary of Contents for Evo190E
Page 1: ...EN IT Manuale Utente User Manual EVO190E PROFILER WITH LED SOURCE ...
Page 19: ......
Page 39: ......
