ProLights ECLIPSEFRESNELJTW, User Manual, Page: 15 / 60

13
ECLIPSEFRESNELJTW
3.4 DMX MODE
• To set the DMX address, press the button MENU so many times until the display shows Connect, then
select throught the buttons UP/DOWN Dmx Address , then press the button ENTER.
• Press UP/DOWN button to select the desired value ( 001-512 ). Press and hold to scroll quickly.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To operate the ECLIPSEFRESNELJTW with a light controller, adjust the DMX start address for the first a
DMX channel. For example, If the controller is provided with to command the function of the first DMX
channel, adjust the start address 33 on the ECLIPSEFRESNELJTW. The other functions of the light effect
panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
DMX Address: 48 DMX Address: 38 DMX Address: 33 DMX Address: 43
Fig.9 - Example 5 DMX channels configuration
DMX512 Controller
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
1 33 33 34 35 36
2 33 33-34 35 37 39
5 33 33 - 37 38 43 48
7 33 33 - 39 40 47 54
8 33 33 - 40 41 49 57
9 33 33 - 41 42 51 60
12 33 33 - 44 45 57 69
13 33 33 - 45 46 59 72
16 33 33 - 48 49 65 81
19 33 33 - 51 52 71 90
21 33 33 - 53 54 75 96
. . . . . . . . . . . .