ECLIPSEFC
18
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automatically.
Setting
• Press the button MENU so many times until shows
INFORMATION
• In order to reset custom modes to default values select
SETTING
using the button UP/DOWN
.
• Press the ENTER button.
3.15 WHITE CALIBRATION
• Press the button MENU then press the button UP/DOWN so many times until show
WHITE CALIBRATION
.
Press the button ENTER to confirm.
• Press the button UP/DOWN to select
2700K - 3200K - 4200K - 5500K - 6000K - 8000K - Full RGBL - Custom.
Press the
button ENTER.
NOTE - The pre-programmed white colors are fully pre-programmed and will not be altered by changes.
Instead,
Custom
mode allows to combine the colors Red - Green - Blue - Lime.
• Press the button MENU so many times until the display shows
WHITE CALIBRATION
, then press the button
ENTER.
• Through the button UP/DOWN select
CUSTOM
, then press the button ENTER.
• Select the color Red - Green - Blue - Lime through the buttons UP/DOWN. Press the button ENTER to
confirm.
• Set the value (000 - 255), using the buttons UP/DOWN.
• Continue until the desired setting is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
