ProLights Cyber24, User Manual

Page: 27 / 36

9
CYBER24
5. Tap the Rec Exit button while pressing and holding down the Record button, the Scene led goes out,
indicating the exit of Edit mode.
EXAMPLE: Delete the third step of the program on Flash button 15 on Page 2.
1. Record enable.
2. Tap the Mode Select button to select CHNS SCENE mode.
3. Tap the Page button until Page 2 led lights.
4. Tap the Flash button 25 while pressing and holding down the Edit button, the Scene led lights.
5. Tap the Step button to scroll to the third step.
6. Tap the Delete button to delete the step.
7. Tap the Rec Exit button while pressing and holding down the Record button to exit Edit mode.
4.6 Inserting of one or more steps
1. Record enable.
2. Record a scene or scenes you wish to insert.
3. Be sure you’re in CHNS SCENE and Enter the Edit mode.
4. Tap the Step button to scroll to the step which you wish to insert before. You may read the step from the
Segment Display.
5. Tap the Insert button to insert the step you’ve created before, all leds will flash, indicating the step is
inserted.
6. Exit Edit mode.
4.7 Modification of one or more steps
1. Enter Edit mode.
2. Tap the Step button to scroll to the step you wish to modify.
3. Press and hold the Up button if you want to raise the intensity. If you want to lower the intensity, press
and hold down the Down button.
4. While holding down the Up or Down button, tap the Flash button corresponding to the DMX channel of
the scene you wish to modify until you reach the desired intensity value read from the Segment Display.
Then you may tap the Flash buttons until you are satisfied with the new scene.
5. Repeat steps 2, 3 and 4 until all the steps have been modified.
6. Exit Edit mode.