19
CROMOWASH100
Black
Save
in order to save the last DMX data in
case of DMX signal error.
in order to blackout in case of DMX
signal error
DMX data
DMX error
Reset function
•
Press the MENU button and select, via the directional buttons, the [
Intro
] menu choice, then press the
ENTER button to confirm the choice.
•
Press the UP and DOWN buttons to select [
Reset
] menu voice and confirm the choice by pressing the
ENTER button.
•
Select [
Yes
] in order to reset custom modesto default values.
Fan setting
•
Press the MENU button and select, via the directional buttons, the [
Intro
] menu choice, then press the
ENTER button to confirm the choice.
•
Enter the fan setting [
Fans
] to select the fan speed mode
•
Select the desired setting (
High - Normal - Low - Auto
).
When fan setting is on AUTO mode, the fixture will
automatic adjust the fan speed and fixture power, ensure the fixture temperature is not exceed the limit.
When fan setting is on other modes, the fan will run according to the set speed.
Display setting
•
Press the MENU button and select, via the directional buttons, the [
Intro
] menu choice, then press the
ENTER button to confirm the choice.
•
Press the UP and DOWN buttons to select [
Display
] menu voice and confirm the choice by pressing the
ENTER button.
•
Select a display mode [
60close
] or [
Bright
].
When in the [
60close
] setting, the display backlight will turn off after 60 seconds.
When in the [
Bright
] setting, the display backlight will stay on.
Keylock function
•
Press the MENU button and select, via the directional buttons, the [
Intro
] menu choice, then press the
ENTER button to confirm the choice.
•
Press the UP and DOWN buttons to select [
Keylock
] menu voice and confirm the choice by pressing the
ENTER button.
•
Select [
Yes
] or [
No
].
When the fixture is set as pass [
Yes
] after few seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE. The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Dimmer
•
Press the MENU button and select, via the directional buttons, the
[Intro]
menu choice, then press the
ENTER button to confirm the choice.
•
Enter
[Dimmer
] to select dimmer mode and dimmer speed. When dimmer is set to
[OFF]
, the RGBW and
MASTER DIMMER are linear. The Dimmer 1/2/3/4 are speed modes of the non linear dimmer,
[Dimmer1]
is
the faster, while
[Dimmer4]
is the slowest.
NOTE. The factory default setting is [Dim4].
Fixture information
•
Press the MENU button and select, via the directional buttons, the [
Intro
] menu choice, then press the
ENTER button to confirm the choice.
•
Press the UP and DOWN buttons to select [
Info
] menu voice and confirm the choice by pressing the
ENTER button. The display will show the installed software version.
Summary of Contents for Cromowash100
