CROMOSPOT500
18
3.13 EDIT CUSTOM
•
Press the MENU button, select the [
Edit
] menu voice and press the ENTER button to confirm the choice.
•
Edit the custom programs by adjusting the value of [
Step
], [
Pan
], [
Tilt
], [
Speed
], [
Color
], [
Gobo1
], [
Gobo2
], [
Gobo2
Rot
], [
Prism
], [
Prismt
], [
Iris
], [
Focus
], [
Dimmer
], [
Strobe
], [
Time
] and [
Use
].
•
Press the ENTER button to confirm.
•
Enter [
Use
] and select [
Yes
] to run the steps user need.
CROMOSPOT500 will execute all the steps in the custom program and it will stop. To make the fixture to
start over add a last step whose duration is 0 second.
Example
Step1:
Time=5
Use= Yes
This step creates a loop
Step2:
Time=4
Use= Yes
Step3:
Time=6
Use= Yes
Step4:
Time=0
Use= Yes
Step5:
Time=0
Use= No
Unused steps
...
...
...
Step255:
Time=0
Use= No
To disable
To enable
Reverse
Reverse
Reverse
Normal
Normal
Normal
Used for reversing Pan
movement
Pan
To disable
To enable
Used for reversing Tilt
movement
Tilt
Adjusting the dimmer
Dimmer
Normal setting
Reverse setting
NOTE
. CROMOSPOT500 will execute all the steps in the custom program in the stand-alone operation mode.
•
Go to MENU > [
Intro
] . Enter [
Run
] to select the operation mode: [
Custom
].
3.14 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Invert function
•
Press the MENU button, select the [
Invert
] menu voice and press the ENTER button to confirm the choice.
•
Select the parameter to be changed between [
Pan
], [
Tilt
] and [
Dimmer
] and press the ENTER button to
confirm.
•
Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
•
Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
•
Enter [
Use
] and set [
Yes
] to run the new setting.
Summary of Contents for CROMOSPOT500
