23
CHROMAPIX
Fan Setup
This setting determines the output of the CHROMAPIX based on the position of the Red, Green, Blue,
White and Dimmer faders.
•
Press the button MENU repeatedly until
Fan Setup
shows, and press ENTER button to confirm.
•
Use the button UP/DOWN to select a setting (
Auto/High
).
•
When in
Auto
, the fan speed automatically changes so the fixture’s temperature does not exceed the
limit. When in
High
, the fan speed follow the max predefine values.
White balance
Enter the White balance to adjust the
Red
,
Green
,
and Blue
parameter to make different whites.
•
Press the button MENU so many times until shows
White Balance
, and press the button ENTER to
confirm.
•
Select red, green or blue (
Red
,
Green
, and
Blue
), through the buttons UP/DOWN.
•
Press ENTER button to confirm.
•
Set the value (
125-255
), through the buttons UP/DOWN.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
3.15 ETHERNET SETTING
This setting allows you to choose a particular Ethernet protocol setting.
1. Press the MENU button to enter the main menu and scroll using UP/DOWN button to select
Ethernet
Setting
, and then press ENTER button.
2. Use UP/DOWN button to select:
Protocol - IP Mode - Net - Subnet - Universe - Start Channel - ArtNet To Dmx
.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Protocol
In
Protocol
select
KlingNet - ArtNet
, through the buttons UP/DOWN. Press ENTER button to confirm the
selection.
IP Mode
In
IP Mode
select
Static - DHCP - Manual
, through the buttons UP/DOWN. Press ENTER button to confirm
the selection.
Net
Select
Net
and press ENTER button to set the desired value (
0-127
) through the buttons UP/DOWN.
Subnet
Select
Subnet
and press ENTER button to set the desired value (
0-15
) through the buttons UP/DOWN.
Universe
Select
Universe
and press ENTER button to set the desired value (
0-15
) through the buttons UP/DOWN.
Start Channel
Select
Start Channel
and press ENTER button to set the desired value (
1-512
) through the buttons UP/
DOWN.
ArtNet To Dmx
Select
ArtNet To Dmx
to convert Artnet protocol into DMX. Press ENTER button and select
Yes
or
NO
.
