BEAMSPOT 10
10
DMX Address: 33
DMX Address: 45
DMX Address: 37
DMX Address: 41
Example 4 DMX channels configuration (4CH mode)
Fig.5
DMX512 Controller
. . . . . . . . . . . .
3.10 OTHERS FUNCTIONS
It is possible to change the parameter value in the following way:
Dimmer
You can set the dimmer speed to fast, middle, slow, or off. To select the dimmer speed, do the following:
•
Press the button MENU repeatedly until
[dIMd]
shows on the display.
•
Press the button ENTER and
[dIM1]
,
[dIM2]
,
[dIM3]
, or
[OFF]
shows on the display.
•
Use UP/DOWN button to select
[dIM1]
(fast speed),
[dIM2]
(middle speed),
[dIM3]
(slow speed), or
[OFF]
(dimmer speed off).
•
Press the button ENTER to save the setting.
Custom Settings
The BEAMSPOT10 allows you to choose custom strobe and dimmer settings to achieve the effect you
like. To select these custom settings, follow the instructions below:
•
Press the button MENU repeatedly until
[U--]
shows on the display.
•
Press the button ENTER and
[S 0–S255]
(strobe, slow to fast) shows on the display.
•
Use UP/DOWN button to select the desired strobe rate.
•
Press the button ENTER and
[d 0–d255]
(dimmer, 0–100%) shows on the display.
•
Use UP/DOWN button to select the desired dimmer level.
•
Press the button ENTER to save the setting.
Summary of Contents for BEAMSPOT10
Page 1: ...EN IT Manuale Utente User Manual BEAMSPOT10 SUPER PINSPOT ...
Page 17: ......
Page 35: ......
