BEAMROLL8Q
16
3.13 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Setting projector functions
Press the button MENU, set the desired parameter using UP/DOWN and press the button ENTER to
confirm the setting.
•
bLMd
- Blackout function. Select
YES
or
no
if want, respectively, enable or disable the function.
•
LEd
- Back light display. Select
on
or
oFF
if want, respectively, enable or disable the back light display
function.
•
diSP
- Reversing display screen.
diSP
deactivate the function (display shown in the normal mode),
diSP
activate the function (display shown in inverted mode).
•
1tiL
- Reverse Tilt movement of the moving head 1.
no
disables the function (normal setting),
YES
activate the function (reverse tilt).
•
2tiL
- Reverse Tilt movement of the moving head 2.
no
disables the function (normal setting),
YES
activate the function (reverse tilt).
•
rev
- reverse mode of the LEDs illumination.
YES
activated (the LED will light up on both heads moving
in reverse), no disables the function (the same LEDs will light up on both head units).
•
tEst
- test device. In
tEst
the unit will run self-test.
Hold and press the button MENU for three seconds to exit the menu mode.
Reset functions
Press the button MENU so many times until the display shows
rSET
, then press the button ENTER to reset
the default values.
3.14 INFORMATION
Fixture information
Press the button MENU, set the desired parameter using UP/DOWN and press the button ENTER to
confirm the setting.
•
vEr
- Through the
vEr
function you can display the software version of the device.
•
tEMP
- Through the
tEMP
function you can display the temperature of the projector.
•
FhrS
- Through the
FhrS
function you can display the running time of the projector.
Hold and press the button MENU for three seconds to exit the menu mode.
3.15 REMOTE CONTROL EC800 (optional)
The remote control EC800 (fig.7) available as an accessory allows to control different functions as indicated
in the table below:
Fig.7
BUTTON
FUNCTION
BLACKOUT
Blackout the unit
FUNCTION
1.
Sound Strobe (Full ON)
2.
Auto Strobe (Full ON)
Select Show
Show 1 - 8
MODE
Random Show (LED OFF)
Show (LED ON)
Summary of Contents for BEAMROLL8Q
Page 1: ...MANUALE UTENTE USER MANUAL BEAMROLL8Q IT EN MULTI BEAM PROJECTOR...
Page 21: ......
Page 43: ......
