ATMOSFERA1803
16
3.14 Basic instructions for DMX operation (TOUR)
MASTER DIMMER
•
CH1 controls the intensity of the currently projected color.
•
When the slider is at the highest position (255) the intensity of the output is the maximum.
RED, GREEN, BLUE, WHITE AND AMBER COLOR SELECTION
•
CH2-CH11control the intensity ratio of each of the red, green, blue, white & amber Leds.
•
When the slider is at the highest position (255) the intensity of the color is the maximum.
•
CH2-CH11 can be combined together to create over 16 million colors.
COLOR MACROS AND WHITE BALANCE
•
CH12 selects the required COLOR MACRO and whites in different color temp.
•
CH12 has priority over CH2-CH11 & CH14.
•
CH1 is used to control the intensity of the COLOR MACRO.
STROBE
•
CH13 controls the strobe of CH2 to CH12.
ID ADDRESS SELECTION
•
CH17 is used to select the target ID address.
•
Each independent DMX address may have upto 66 independent ID addresses.
•
An ID address of 0 will activate all ID address locations.
AUTO
•
CH14 selects the preset AUTO programs AUTO 1 - AUTO 10 or the custom programs PR.01 - PR.10.
•
CH14 has priority over CH2-CH1.
3.15 Editing custom programs
To edit the custom programs:
•
Press the button MENU so many times until show [
EDIT
] and press the button SET to confirm.
•
Select the program
PR.01 - PR.10
through the buttons UP and DOWN.
•
Each custom program has 30 steps that can be edited.
•
Each step allows the creation of a scene using red (
Red
), green (
Green
), blue (
Blue
), white (
White
), amber
(
Amber
), strobe (
Strobe
), time (
Time
) and fade (
Fade
).
•
Set the value (000 - 255 ), through the buttons UP and DOWN.
3.16 Special functions
•
Press the button menu and select through the directional buttons the [
SET
] mode; and press the button
SET to confirm.
It is possible to view to following functions:
UPLD
•
Select [
UPLD
] to upload the custom programs from the current Master unit to the Slave units.
•
In order to activate the upload function the password must be entered. Password is the same as the main
access password.
•
When uploading the Master and Slave units will display yellow.
•
If an error occurs when uploading the Master and/or Slave units will display red.
•
On successful uploading of the custom programs the Master and Slave units will display green.
Summary of Contents for ATMOSFERA 1803
