ProLights ARIA 700SPOT, User Manual, Page: 39 / 52

13 ARIA700SPOT
Off - The brightness increase is linear.
Dimmer 1 - Light intensity control is finer at low level and coarse at high levels.
Dimmer 2
- Light intensity control is finer at high level and coarse at low levels.
Dimmer 3
- Light intensity control is finer at low and high levels, and coarse to medium levels.
For the ARIA700SPOT you can access the following special functions:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Set Up , then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the Fixture menu, then select one of the following informa-
tion and press the ENTER button to display it.
- Theater Mode - Activate this function to set a lower light output with a lower heat and fans operation.
- Fans Mode - Select this function to set the fans operation mode . Use the arrow buttons to select Auto
Speed /High Speed . Press the ENTER button to confirm your choice.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
Temperature
You can change the parameters of the device by following these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Set Up
icon, then press the ENTER button to
enter the next menu.
• Press UP/DOWN to scroll through the Temperature menu, select one of the following settings and press
the ENTER button to display it.
- Max Temperature - Temperature operating limits. This function allows you to set the maximum tem-
perature inside the projector, after which the lamp will automatically turn off. Press the arrow but-
tons to set the desired temperature (80° -139°). Temperatures of less than 90° C are not critical. We
recommend that you enable this feature for temperatures higher than 90°.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.8 ADVANCED
Reset Functions
You can start a preset program to restore the selected function:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset be-
tween All, Pan, Tilt, Gobo1, Gobo2, Prism, Effect, Focus, Zoom, Frost, Iris .
• Press the ENTER button to confirm your choice and wait for the recovery of the selected function.
Adjust
Adjust - Adjusts the lamp. This function allows you to modify all the parameters of the lamp:
Pan, Tilt, Gobo1,
RGobo, Gobo2, Prism, Effect, Focus, Zoom, Frost, Iris Offset. Press the UP/DOWN button to select one of the param-
eters and press ENTER to edit the value (000-255) through the UP/DOWN button.