ARCLED7314TRI
18
3.18 White calibration
Enter the CAL1 mode to select white color of different color temperature;
•
Press the button MENU so many times until show [
CAL1
] and press the button ENTER to confirm.
•
There are 11 pre-programmed white colors (
WT01 - WT11
) can be edited by using red, green and blue (
Red
- Green -Blue
).
•
Set the value (
000 - 255
), through the buttons UP and DOWN.
3.19 RGB calibration
Enter the CAL2 mode to adjust the RGB parameter to make different whites;
•
Press the button MENU so many times until show [
CAL2
] and press the button ENTER to confirm.
•
Select red, green or blue (
Red - Green -Blue
), through the buttons UP and DOWN. Press the button ENTER
to confirm.
•
Set the value (
000 - 255
), through the buttons UP and DOWN.
When the new setting is activated, the DMX controller choose RGB=255, 255, 255 the write color will be
made by actual RGB values on the [
CAL2
].
3.20 Activate the password
Enter the KEY mode to select whether the access password is on or off.
•
Press the button MENU so many times until show [
KEY
] and press the button ENTER to confirm.
•
Select [
ON
] or [
OFF
].
When the fixture is set as pass [
ON
], after 30 seconds or turn on the fixture next time, the fixture will need an
access password to enter the display menu control.
Note. The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Summary of Contents for ARCHITAINMENT ARCLED7314TRI
Page 1: ...I GB Manuale Utente User Manual ARCLED7314TRI ARCHITAINMENT LED PROJECTOR...
Page 23: ......
Page 47: ......
