Prolights Tribe 208-0036, User Manual, Page: 30 / 36

LUMI4UTRI 12
4
5
1
2
3
Address 1
Address 2
Address 3
Address 4
Address 5
Address 6
Address 7
Address 8
Address 13
Address 14
Address 15
Address 16
Address 9
Address 10
Address 11
Address 12
1. BLACKOUT PEDAL to black out the lights.
2. SOUND PEDAL to activate the sound mode.
3. CHANGE COLOR/AUTOSHOW PEDAL
4. SWITCH ON/OFF
5. DIP-SWITCH
3.14 OPERATION THROUGH THE WIRELESS FOOTSWITCH
To control the LUMI4UTRI with the wireless footswitch controller (included), you must set the same trans-
mission channel for both devices. To set the address on LUMI4UTRI:
• Press the button MENU so many times until the display shows rF , then press button ENTER to confirm.
• Using UP/DOWN button to select On or Off to enable or disable the wireless footswitch control, then
press the button ENTER.
• If enable, using UP/DOWN button to select the desired transmission channel rF1 - rF16 .
• Press the button ENTER to confirm.
To set the same transmission channel on the footswitch, proceed as shown in Figure 8.
Fig.8 - Wireless connection via Dip-Switch addressing