Category
Parameter
PID
GET
SET
Product
Information
DEVICE_INFO
0x0060
x
PRODUCT_DETAIL_ID_LIST
0x0070
x
DEVICE_MODEL_DESCRIPTION
0x0080
x
MANUFACTURER_LABEL
0x0081
x
DEVICE_LABEL
0x0082
x
x
FACTORY_DEFAULTS
0x0090
x
x
SOFTWARE_VERSION_LABEL
0x00C0
x
DMX512
Setup
DMX_PERSONALITY*
0x00E0
x
x
DMX_PERSONALITY_DESCRIPTION
0x00E1
x
DMX_START_ADDRESS*
0x00F0
x
x
SLOT_INFO
0x0120
x
SLOT_DESCRIPTION
0x0121
x
DEFAULT_SLOT_VALUE
0x0122
x
Dimmer
Settings
DIMMER_INFO
0x0340
x
CURVE*
0x0343
x
x
CURVE_DESCRIPTION
0x0344
x
x
OUTPUT_RESPONSE_TIME*
0x0345
x
x
OUTPUT_RESPONSE_TIME_ DESCRIPTION
0x0346
x
MODULATION_FREQUENCY*
0x0347
x
x
MODULATION_FREQUENCY_ DESCRIPTION
0x0348
x
Sensors
SENSOR_VALUE
0x0201
x
x
Product
Model ID
Mode IDs
ECLDISPLAYUNFC
D062
BASIC: 1
STANDARD: 2
EXTENDED: 3
ECLDISPLAYDATFC
D063
BASIC: 1
STANDARD: 2
EXTENDED: 3
PROLIGHTS - EclDisplay
UNFC /
EclDisplay
DATFC
15
10 - RDM FUNCTIONS
The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.
Summary of Contents for EclDisplay DATFC
