is detected within range. The light will turn off automatically after approximately 90
seconds, or when no motion is detected.
6.
Slide the switch to “OFF” to save battery power if you do not use the light for a long time.
7. Select Light Color (Warm or Cool), by pressing the round button on the top of light
or on the remote control.
8.
Control the light brightness by using the remote control. Push the 30% button to
reduce the light brightness and to conserve battery life.
9.
Push the + or – to increase or decrease the desired brightness.
10. Default brightness when turning on the light is at 100 % brightness.
How to use the timer function
Timer function only functions properly when the switch on the bottom of the light
is in the ON position, do not use timer in AUTO mode.
1. Turn the switch on the bottom of the light to ON position.
2. Using the remote, push the button with the desired time to shut off (1 minute, 5 minutes, 15
minutes, or 30 minutes)
3. Light will blink twice letting you know the timer has been set to shut off in desired minutes
selected.
4. If you push the wrong desired time button, simply push the correct desired time button, and it will
override the previous selection.
5. To remove the timer function, turn the switch on the bottom of the light to OFF and then back to
ON or AUTO.
How to charge the motion sensor led cabinet light
Please use 5V 1A power adapter and USB cord to charge the light, the indicator
turns red when the light is charging, it turns green when the light is fully charged.
