Motion Sensor LED Cabinet Light
User Manual
Model: CP-CL04
*PLEASE NOTE: Once the remote has been used, even in auto mode, the
remote overrides the switch function selected on the light itself. To reset, switch the
unit to OFF and then back to ON or AUTO mode* This will need to be repeated
after each remote use if you are wanting to be able to use the AUTO (Motion Senor)
function.
How to use
The Light has 3 working modes. (AUTO – Motion Sensor, OFF & ON-stays on all
the time)
1. Remove plastic protective film from the top of the light.
2. Pull out the plastic tab from battery compartment, on the remote control.
3. Slide the switch on the light to ON, the light will come on and stay on.
4. Slide switch to OFF, to turn the light off.
5. Slide switch to AUTO, to operate in the motion sensor mode. Light will work only
in dark or shadowed/shaded areas. The light will turn on automatically when motion
