9 10
Attachment of the caster rollers may be required. The caster is placed into the hole in the
direction of the arrow until the metal end of the caster contacts the plastic end.
⚫
Usage of function buttons
1.
“
ON/OFF
”
button
After power on, the buzzer beeps twice, indicating the system enters the standby state.
When the indicator has been lighting for 1 minute without any button pressed, it darkens
30% of original luminance; if the button is used at this time, it becomes bright again.
After power on, press the
ON/OFF
button to startup to enter the default operating state.
(Note, only power cord plug is firstly pulled out to enter the default operating state; if the
appliance is closed without pulling out the plug of power cord, when ON/OFF button is
pressed, startup state in the last time can be memorized, excluding Timer and sleeping
mode) and the default operating state is as follows:
－
Normal wind mode; No LED display;
－
Power indicator is ON;
－
Swing indicator is OFF;
－
Cooling/humidifying indicator is OFF;
－
Medium wind is started up and transferred to low-speed after 3s and low-speed
indicator is ON;
－
Timer function is OFF and the indicator is OFF;
－
Ambient temperature indicator is ON;
－
Ambient temperature is displayed.
2
. “SPEED” button
Press the
SPEED
button to adjust the wind
speed, which is successively low →medium
→high →
silent
→ low, and
then re-circulates, and corresponding indicators of four wind
speeds are ON. (Note: the silent speed can only be operated under normal wind mode,
which is not applicable for other modes).
3
. “MODE”
button
Press the
MODE
button to select the 4 wind modes (normal wind, smart wind, natural
wind, sleeping wind) when the appliance is in cool wind state (the button is invalid when
it is in heating function), the wind speed of the appliance is automatically changed to
adapt the air flow to the conditions required by the selected mode. There is no LED
indicator icon for normal wind. In the other three modes, corresponding LED indicators
are ON.
-
Normal wind: Operate at the set constant wind speed.
-
Natural wind
: This is a preprogrammed mode that automatically changes the wind
speed cyclically from high to medium to low, creating a natural wind movement. In this
mode, the
“
SPEED
”
button allows you to choose the high, medium or low air flow
program. However, the display panel only displays the initial speed (high, medium, low).
All other speeds activated and deactivated automatically are not displayed on the screen.
(Note: when it is at silent speed, wind modes cannot be adjusted).
Rules for wind operation in the natural wind mode are as follows:
