ProKlima FAN-110156.1, Instruction Manual

Page: 44 / 103

- 43 - FAN-110156.1 / FAN-110156.2
PARTS DESCRIPTION
1
．
Louver switch
2
．
Speed switch
3
．
Timer
4
．
Louver
5
．
Front cover
6
．
Foot
OPERATING INSTRUCTIONS
1.
Speed adjustment
Turing the speed adjustment knob clockwise or counterclockwise can start/stop the fan select a rotation
speed:
Speed 0= stop
Speed 1= Low speed
Speed 2= Medium speed
Speed 3= High Speed
NOTE: When the timer knob is at “OFF” position, the fan will not operate, therefore, each time you want to
use the fan, the timer knob should be at ”ON” position before you adjust the speed .
2. Louver switch
While the fan is rotating, the louver switch can control the louver to either rotate or
stop by switch it left or right.
3.
Timer
If the timer has set, the fan will automatically stop to the time you have set but within
120minutes the maximum. To operate this timer, please turn the timer switch clockwise to
the desired timing position.
CLEANING

Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains
cable from the socket.

Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.

Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 50W