FOR INDIVIDUAL GAME INSTRUCTIONS, REFER TO THE SEPARATE GAME PLAY INSTRUCTION CARD IN THIS BOX
Blaster Port
Blaster Port
Plug in ONE of the ProjeX Blasters
into the Blaster Port as shown
You can use either port for either
blaster – it does not matter
IMPORTANT! For SINGLE player
games, ONLY HAVE ONE
BLASTER PLUGGED IN
Plug in the second blaster for two
player games ONLY!
Port
4
5’
ProjeX
Projector
Wall
24”-30”
ProjeX works best when played, in a dark room, on
a light-colored wall that does not have any pictures
or art on it
Set your ProjeX Game Arcade base on a low table
(24”-30” tall) with the projector heads aimed
towards the wall
The Projector should be 5’ from the wall
NOTE: ProjeX will NOT work on dark-colored walls,
walls with wallpaper, or painted patterns
2
There are 3 different
target Image Slides
included with your
ProjeX Game
Difficulty Level
Slide Color
Blue
White
Easy
Difficult
Red
Medium
Target
Image
Difficulty
Slide Color
Alien Ship
Alien Ship
Duck
Target
Duck
3
Use a Phillips screw-
driver to remove the
battery compartment
cover (bottom of base)
Insert 3x AA batteries
(follow the polarity mark-
ing ‘+’ & ‘-’), then close
the compartment
Close cover and
replace screw
Phillips screwdriver
(not included)
Cover
Bottom of Base
1
Slide the Image Slide into
the Image Slide Slot as
shown
Be sure to put the Image
Slide in the correct way –
if it does not seem to fit it
is backwards!
Press Power/ Game
(Red) button to turn
ProjeX on
To focus target images,
rotate Target Focus adjusts
You have 45 seconds to
adjust the focus
Store the other image
slides in the storage
slots on the base
Image Slide
Image Slide (2)
Image Slide Slot
(both sides)
Image Slide Slot
5
6
Target Focus
NOTE: Games will not
start if Image Slide is
not installed correctly
SET UP INSTRUCTIONS – READ THIS FIRST!
