3D Systems Confidential
www.3dsystems.com
Open waste drawer and install waste bag onto waste bag
holder by pushing the top frame in while inserting the
bag over the frame. Drape bag over the sides of holder and
close drawer.
Once bag is removed, seal bag
and dispose of it according to your local regulatory
guidelines.
(E)
(F)
Reverse procedure to remove bag. Dispose of the used pan
liners into the waste bag.
B
E
F
Wear protective gloves
before removing any waste material. Be careful not to spill, drop, or expose others to these materials. Dispose the material according to your local
regulatory guidelines.
Waste Bag Installation & Removal
OPERATION
TEST PRINT
PLATFORM EMPTY/
DOOR CLOSED?
Y/N
A1
A4
A5
A4
A6
A
Submit Print Build
(A1),
(A2)
(A3)
(A4)
(A5)
(A4)
(A6).
NOTE: It is recommended to submit a Test Build prior to each
build job.
Press
MENU
Scroll
to highlight
TEST PRINT
and
press
YES
. The message
PLATFORM EMPTY? DOOR
CLOSED? Y/ N
scrolls across the display,
Press YES
if
the platform is empty and the door is closed, otherwise press
NO
A
A2
A3
Quick Reference Guide
3-D Printer
ProJet™ 5000
P.N.: 316131-04, 02/12
