Typical power and current
110 V, 60 Hz - 17.6 W, 0.285 A
230 V, 50 Hz - 17.6 W, 0.163 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
Cooling - Convection
Maximum ambient temperature (Ta max.) - 40°C (104°F)
Minimum ambient temperature (Ta min) - 0°C (32°F)
Total heat dissipation* - 65 BTU/hr.
*Calculated, +/- 10%
Approvals
EU safety - EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC - EN 55015, EN 55032, EN 55103-2, EN 61000-3-2,
EN 61000-3-3, EN 61547
US safety - UL 122
US EMC - FCC Part 15 Class A
Canadian safety - CSA C22.2 No. 118-1959
Canadian EMC - ICES-003 Class A
Australia/NZ - C-Tick N4241
Included items
Lens
Custom gobo in gobo holder
Gobo holder clip
Mounting bracket
Power cable, 1.9 m (with mains plug)
Specifications are subject to change without notice. For latest product specifications, see
www.projectedimage.com
Disposing of this product
Products are supplied in compliance with Directive 2012/19/EC of the European Parliament and of the
Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), where applicable.
Help preserve the environment! Ensure that this product is recycled at the end of its life. Your supplier can
give details of local arrangements for the disposal of this projector.
Photobiological Safety Warning
The label shown below is displayed on this product. If it becomes difficult or impossible to read, it must be
replaced using the illustration below to reproduce a new label sized 45 x 18 mm, in black on a yellow
background.
RISK GROUP 2 CAUTION. Possibly hazardous optical radiation emitted from this product. Do not
stare at operating lamp. May be harmful to the eyes.
email: [email protected]
web: www.projectedimage.com
tel: +44 (0) 191 265 9832
projected image: Unit 17, Hoults Estate, Walker road, Newcastle upon Tyne NE6 2HL
Gobos & Projection Solutions
www.projectedimage.com
Risk in and Ownership of the Goods
Risk in the Goods shall pass to the Buyer on delivery.
Ownership in the Goods shall not pass to the Buyer until the Company has received in full in cleared funds all sums due to the Company in respect of
the Goods and all other sums which are or may become due to the Company from the Buyer on any account.
Until ownership of the Goods has passed to the Buyer, the Buyer shall:
hold the Goods on a fiduciary basis as the Company’s bailee
store the Goods separately from all other goods of the Buyer or any third party in such a way that they remain identifiable as the Company’s property
not destroy or deface any identifying mark on the Goods or their packaging
maintain the Goods in satisfactory condition insured with the Company’s interest noted on the policy and hold any proceeds of such insurance on trust
for the Company and not mix them with any other money.
Warranties
The Company warrants that the Goods are of satisfactory quality.
If the Buyer wishes to make a claim under this warranty, the Buyer shall give written notice to the Company within 30 days of the discovery of the
defect and give the Company a reasonable opportunity to inspect the Goods in question.
The Company shall not be liable for any breach of warranty if the Buyer makes any further use of the Goods after giving such notice or alters or repairs
the Goods without the agreement of the Company.
The Company shall not be liable for any breach of warranty if the Buyer fails to handle the Goods in accordance with the Company’s handling and
installation instructions.
Furthermore, the Goods must be installed by an appropriately qualified technician in accordance with the specifications of any projection or lighting
equipment.
The Company’s liability under the warranty shall be limited to repairing or replacing the Goods in question or refunding the price of such Goods.
Exchange and Returns
The Company warrants that the goods are of satisfactory quality. If the Buyer is not satisfied with the Goods as laid out in the Contract, the Company
may at its sole discretion offer to exchange or re-manufacture said Goods. This is subject to the provisions laid out in paragraph 7 relating to the correct
handling and Installation of the Goods.
Returns Policy
1.
All of our projectors come with a 1 year warranty.
2.
Goods are NOT supplied on a trial basis.
3.
If found to be faulty from new they can be returned for replacement or refund.
4.
You have the right to return up to 14 days from the day delivery has been made. Goods that have been made to order or to a chosen specification ( i.e
Gobos) or that have been opened/unsealed cannot be returned under the 14 day "Cooling Off Period".
5.
You must provide us with written notification either by letter or email giving details of the goods ordered and their delivery where appropriate.
6.
Once we have been notified, you must return the goods immediately. You must either return the goods at your own expense or we can arrange
collection of the goods via our courier for a fixed fee.
7.
The goods must be returned to us in the same condition they were sent out in.
8.
Once you have notified us that you wish to return the goods we will refund or re-credit you as soon as possible, but in any event within 30 days, for
any sum that has been paid by you for the goods excluding any extra charges incurred by us at your request, such as Express Delivery Etc.
9.
You have a duty of care under these terms to take good care of the goods so that they may be sold again as new. We will claim from you for any
resulting loss in value for goods not kept in such a condition that they may be sold again as new.
10.
Refunds will be done within 30 days from cancellation as long as goods have been returned and the sections above have been followed. If the
goods have not been returned refund will not be processed until after the goods have been returned.
9.
Limitation of Liability
The Company’s liability in contract, tort or otherwise arising out of the subject matter of the Contract shall not exceed £1,000 and the Company shall
under no circumstances be liable to the Buyer for any consequential, indirect or economic loss or damages.
Terms & Conditions
