Projecta IntelliJay PM200-BTJ, Instruction Manual

Page: 6 / 24

6
2. KEY FEATURES AND
FUNCTIONS
2.1 Multiple Inputs
The PM235J transformer unit accepts inputs from AC mains,
solar panel and vehicle battery. However, see Table 1 at right for
details.
AC MAINS
x x
SOLAR
x x
VEHICLE
BATTERY
x x
DOMINATING
SOURCE AC MAINS AC MAINS COMBINE
Table 1 Multiple inputs
2.2 Battery Charger Of House Battery
The charger automatically starts when the appropriate qualified power is connected, either from AC mains, alternator or solar.
With multiple charging stages (soft start-bulk absorption float-recycle), PM235J is designed to fully charge a battery quickly.
To guarantee the optimal charging for batteries of different states, the PM235J features a Microprocessor-controlled charging
algorithm. The Float and Recycle charging programs guarantees that the battery condition does not change despite being
connected for a longer period.
1.2 LCD Monitor PMLCD-BTJ (PM200-BTJ only)
The LCD monitor is a digital control center for the PM235J transformer unit. See section 5.2 for operation of LCD monitor.
FEATURES:
• T-Bus design (can be connected to multiple devices)
• System monitoring
• Configuration
• Built-in Bluetooth for pairing to smart phone
Figure 3 Overview of Monitor
1.3 Water Tank Probes
A maximum of up to 4 probes can be monitored by the system.
NOTE: Always check the probe required for the water tank before purchase.
There are 2 probe styles:
PMWS200:
• Side installation
• Suitable for water tank
• Depth >200mm
PMWS400:
• Side installation
• Suitable for water tank
• Depth 300-400mm
Figure 4 PMWS200
Figure 5 PMWS400