8
STEP 3 – CONNECT TO 240V MAINS POWER
Connect the battery charger to the 240V mains power (ensure the battery charger POWER ON/OFF TIMER is
set to the OFF position).
STEP 4 – SET BATTERY VOLTAGE
Set BATTERY VOLTAGE switch to either 6V, 12V or 24V.
STEP 5 – SET CHARGE CONTROL
AUTO
It is recommended to run AUTO mode when the battery is in the vehicle.
MANUAL
In this mode the charger continues to operate and may in time overcharge and damage the battery.
It is recommended to use the timer with this mode.
ENGINE START
Use this mode to provide a rapid charge. Constant Supervision is recommended.
STEP 6 – SET the POWER ON/OFF TIMER switch
ON
The charger will remain on. It is recommended using in AUTOMATIC mode.
TIMER
Can be used in any charging mode.
HDBC20 Instruction Manual NEW_Layout 1 28/07/11 4:33 PM Page 9
