11. To remove the track head (G) from the track
section (F), first allow the track head (G) to cool.
Pull down on the track head (G)
connector’s locking tab and twist until the
track head (G) disengages.
8
WARRANTY
Printed in China
TROUBLESHOOTING
CARE AND MAINTENANCE
+ to the fixture by turning the breaker
off or removing the fuse from the fuse box.
To clean the fixture, use a dry or slightly dampened clean cloth.
DO NOT
use any cleaners with chemicals, solvents, or harsh abrasives as damage to the fixture
may occur.
Lowes.com
Project Source is a registered trademark of LF, LLC. All rights reserved.
®
Manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for
one (1) year from the date of original purchase.
This warranty does not cover parts becoming defective due to misuse, accidental damage, improper
<+y for indirect, incidental or consequential
damages. Product found to be defective may or may not be replaced with same or like-type product,
<<
pro- rated value. This warranty gives you specific rights and you may also have other rights, which
vary from state to state. Proof of purchase is required to exercise the warranty.
11
G
F
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Light bulb will not illuminate.
1. Light bulb is burned out.
2. Power is off.
3. Incorrect wiring.
4. Faulty light switch.
5. Connector or track head
may be installed improperly.
/!; !
2. Make sure power supply
is on.
3. Check wiring connection at
power source and at track
power feed.
4.
Test or replace light switch.
5. Check the connections for
proper installation.
Blown fuse or tripped circuit
breaker when fixture is
turned on.
1. Incorrect wiring.
1. Check wiring connection at
power source and at track
power feed.
;%X+!'*$Z&$/* !
CFL bulbs and LED bulbs are not recommended for this item.
