Page 16
Owner’s Handbook
Troubleshooting
Function Diagnostics
1.
Use the (right) SELECT button to toggle up through the configuration numbers, configuration
display should continue to flash during setting (10, 30, 35, and 40) until the desired configuration
number is displayed.
2.
Press the (left) ENTER button and hold for 2 seconds to lock in configuration. The configuration
number will flash 4 times to indicate confirmation and then go ON solid for 2 seconds before the
display is turned off.
3.
Once the configuration number has been set, apply the correct identification decal.
- Red for all 12 volt models
- Yellow for all School Bus models
- Green for all 24 volt models
4.
PCM is now in the off state and is ready to use.
Summary of Contents for X45 plus
Page 1: ...OWNER S HANDBOOK ...
