2
1
1
CAUTION
DO NOT place hands on or near support bars.
Pinch points are created during lifting and lowering
the
desk converter
. Failure to follow these
instructions may result in serious injury or damage.
Connect power
adapter and cable
Please make sure all installed equipment are
centered on the table, and not hanging off of
the edge or it may cause injury or damage.
Careful
Cable
Adhesive buckle helps to make the
cables clean and organized. Please
leave enough length of all cables for
height adjustments, otherwise it may
cause unexpected damage or injury.
Cable Buckle
Peel and attach the adhesive
buckles to the underside of
the
desk converter
Careful
Use the cable management
to guide and bundle the cables
1
How to use handswitch
●
“▲”
●
“▼”
Adjust the desk upwards
Adjust the desk downwards
Solution
Attention
1.
Power supply: AC
100V
-
240V,50/60HZ
2.
Operational Temperature
:
0
°
C
-
4
0°C
3.
Unplug the power plug before cleaning, wipe the dust on surface with a
damp
cloth when cleaning, be careful not to let moisture into the internal parts or
connectors.
4.
The control box contains electronic components, metals, plastics, wires etc.
Please dispose of it in accordance with each country's environmental legislation.
5.
Check carefully to ensure correct and complete assembly before using.
6.
Please read all instructions before first use.
7.
Keep children and pets away from
desk converter
due to moving components.
8.
Slight noise caused by the belt or brake system. This will not have any effect
on the use or performance of the
desk converter
.
9.
Do not use corrosive chemicals when cleaning the
desk converter
.
10.
If the supply cord is damaged, please reach out to the manufacturer to get a
replacement.
11.
Keep the original packaging in case to protect the
desk converter
when
transporting.
The following troubleshooting guide will help you detect and eliminate
any common issues or errors. If you face a problem not listed below,
please contact your supplier.
No response while pressing UP/
DOWN buttons after connecting
power.
Drifting (movement while
unpowered)
Overwork (Duty cycle: Max 2min
on / 18min off)
1.Ensure all the cables are secure
2. Contact your supplier or dealer
1.Check if overloaded,
m
ax load:55 lbs
2.Contact your supplier or dealer
1.Re
sume use
after
resting
for 30
min
ute
s
2.Contact your supplier or dealer
Place devices and accessories
onto the
desk converter
carefully.
STEP
3
STEP
4
STEP
5
Raise
Lower
Buttons
Problem
Troubleshooting
Warning
Please do not put hands near the
supporting bars, as they change during
adjust
ments and may cause injury.
Please leave enough length
of cable for height adjustment.
Attention
Please transport by using two
people to prevent injury or
damage damage.
Attention
