Progressive Turf Equipment TDR-26, Operator'S Manual And Parts List

Page: 36 / 81

TDR-26
Operator’s Manual
34
TRANSPORT HUBS & OTHER LOCATIONS: As Required
All pivot locations have grease fittings. These include the wing
hinge pivots, the transport wheel hubs, the rotating hitch and the
hitch clevis. Lubricate these areas per the recommended schedule
GEARBOX OIL :
Recommended Oil: SAE 90 EP or SAE 80W90 EP
Factory Fill: Shell Spirax HD SAE 80W90
MOWER MUST BE LEVEL when checking oil level
DO NOT OVERFILL! Gearbox may over-heat causing premature
component damage.
DECK GEAR BOX
Checking Level
– 100h / Monthly
A threaded dipstick is located on the top of the gearbox. Proper oil
level is set when oil is between (2) lines on dipstick. Proper level is
taken
without threading dipstick into gearbox. If the level is low,
add oil through dipstick port until correct level is attained. Replace
and tighten dipstick.
Changing Oil - 600h / Yearly
The gearbox oil should be changed after the first 50 hours of
operation and every 600 hours or yearly afterwards.
Oil change quantity
– 1.37 Qt (1.3 Litres)
4-WAY GEAR BOX
Checking Level
– 100h / Monthly
A screw-in dipstick is provided on the top of the gear box. Proper
oil level is set when oil is between the marks on the dipstick. If the
level is low, add oil through top plug until correct level is attained.
Replace and tighten plug.
Changing Oil - 600h / Yearly
The gearbox oil should be changed after the first 50 hours of
operation and every 600 hours or yearly afterwards.
Oil change quantity
– 1.48 Qt (1.4 Litres)
Fill Plug / Dipstick
Drain Plug
Drain Plug
Fill Plug /
Dipstick