Assembly Instructions
6
Use the Actuator Mount Bracket, Clevis Pin and Cotter Pin
from
bag P6 to mount the top portion of the Track Linear
Actuator to
your installation. The bottom portion comes with an
attached bracket for installation. The wood screws shown in the
diagram are not included. Tighten until secure.
Now that your Drop Down TV Lift is assembled you can attach
your TV Mounting Brackets to the TV Support Arms using the
four M8x12 screws. Tighten until secure.
7
Your Drop Down TV Lift is now fully assembled and ready for
use.
5
For this step we recommend having at least two peope. From
bag P6, use the four M6x25 bolts and washers for the smaller
holes on the outside and the two M10x25 bolts and washers for
the middle holes to mount the assembled Support Column to
the Track Linear Actuator. Install all of the bolts before
tightening to ensure proper alignment.
6
8
