Assembly Instructions
5
STEP 1
Prepare the four legs (5 & 6) as shown in the
picture below.
STEP 2
Using the supplied Allen Wrench, insert four M8x12 Machine
(14)
Screws to attach the Beams (10) to the legs as shown in the
picture below.
STEP 3
Use 16 of the M6x10 Machine Screws
(16)
to attach the
Frames to the Legs. Put the Center Rails
(3)
into the Frames
as shown in the picture below.
*Please note that while the picture shows the table lift set
flipped over, we do not recommend flipping it until Step 5*
STEP 4
Slide the Side Brackets
(1)
into the Frames. Use eight of
the M6x14 Screws to attach the Side Brackets to the
Frames.
