- 3 -
§
BEFORE BEGINNING
Clean your area:
1. Remove the treadmill from box and place on a level ground. It is recommended that you place a protective covering under the treadmill, such as a mat.
2. Place in an area that will meet minimum clearance requirements.
Front & Side: 1ft /30cm
Back: 6ft /180cm
3. Whenever moving or setting up the treadmill, the deck must be in the upright position with the deck safety lock securely engaged.
4. To place the iFold7 in operating position, release the deck safety lock then lower the deck with the end caps until it rests completely on the ground.
5. Make sure safety cord is plugged into the treadmill.
6. Plug unit into outlet following the grounding guidelines below.
GROUNDING:
This unit must be properly grounded to ensure safe operation. Should this equipment fail to perform properly, grounding reduces the chance of electrical
shock.
Helpful Tips
Straddle the running belt and allow it to start moving at a safe speed before stepping on.
Hold the handlebar while adjusting the controls.
Focus your eyesight ahead to help maintain your balance.
Wear comfortable, good-quality walking or running shoes.
Warm-up and cool–down before and after your workout period
Summary of Contents for iFold7
