Step 2: Slide the sensor wires (A8 & E4) through the monitor front housing (K4) as shown in
View A). Then connect the monitor rear housing with monitor front housing by screws (K2).
FINISH THE ASSEMBLY OF MONITOR HOUSING
Attention: Please position all sensors outside of the
monitor housing.
Step 3. Finish the assembly with screw (K2).
ADJUSTING THE HANDLEBAR
Loosen the knob (E10) to adjust the handlebar
position. Once positioned, tighten knob (E10)
securely.
ASSEMBLY OF MONITOR
Connect the sensor wires (A8 & E4) with monitor
wires and put the monitor on the monitor housing.