Progress PI1545X, User Manual

Page: 7 / 40

PROGRAMMES
Programme Degree of
soil
Type of load Programme
phases Consumption values
1)
Dura-
tion
(min) Energy
(kWh) Water
(l)
2)
Normal soil
Crockery and
cutlery • Prewash
• Wash 50 °C
• Rinses
• Dry 195 1.039 11
Heavy soil
Crockery, cut-
lery, pots and
pans • Prewash
• Wash 70 °C
• Rinses
• Dry 140 -
160 1.5 - 1.6 13 - 15
Normal soil
Crockery and
cutlery • Prewash
• Wash 65 °C
• Rinses
• Dry 120 -
130 1.3 - 1.6 15 - 17
3)
Fresh soil
Crockery and
cutlery • Wash 60 °C
or 65 °C
• Rinses
30 0.8 9
4)
All • Prewash 14 0.1 4
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
2)
With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
3)
With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4)
Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance. Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that
is on the rating plate.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener according
to the water hardness.
These settings will be saved until you
change them again.
Progress 7