Progress PDV6060B, User Manual

Page: 3 / 132

3 ENGLISH
1. SAFETY
INFORMATION
For your safety and correct
operation of the appliance,
read this manual carefully
before installation and use.
Always keep these instruc-
tions with the appliance even
if you move or sell it. Users
must fully know the operation
and safety features of the
appliance.
The wire connection has
to be done by special-
ized technician.
• The manufacturer will not be
held liable for any damages
resulting from incorrect or
improper installation.
• The minimum safety dis-
tance between the cooker
top and the extractor hood
is 650 mm (some models
can be installed at a lower
height, please refer to the
paragraphs on working di-
mensions and installation).
• If the instructions for installa-
tion for the gas hob specify
a greater distance, this must
be respected.
• Check that the mains volt-
age corresponds to that
indicated on the rating plate
fixed to the inside of the
hood.
• Means for disconnection
must be incorporated in the
fixed wiring in accordance
with the wiring rules.
• For Class I appliances,
check that the domestic
power supply guarantees
adequate earthing.
• Connect the extractor to the
exhaust flue through a pipe
of minimum diameter 120
mm. The route of the flue
must be as short as possible.
• Regulations concerning the
discharge of air have to be
fulfilled.
• Do not connect the extrac-
tor hood to exhaust ducts
carrying combustion fumes
(boilers, fireplaces, etc.).
• If the extractor is used in con-
junction with non-electrical
appliances (e.g. gas burn-
ing appliances), a sufficient
degree of aeration must be
guaranteed in the room in
order to prevent the back-
flow of exhaust gas. When
the cooker hood is used in
conjunction with appliances
supplied with energy other
than electric, the negative
pressure in the room must
not exceed 0,04 mbar to
prevent fumes being drawn
back into the room by the
cooker hood.
• The air must not be dis-
charged into a flue that is
USER MANUAL