We recommend to do the
cleaning procedure at least
every 5 - 10 True Fan Cooking
PLUS cycles.
1.
Put 250 ml of white vinegar into the
cavity embossment at the bottom of the
oven.
Use maximum 6% vinegar without
herbs.
2.
Let the vinegar dissolve the residual
limestone at the ambient temperature
for 30 minutes.
3.
Clean the cavity with warm water and a
soft cloth.
Cleaning the door gasket
• Regularly do a check of the door gasket.
The door gasket is around the frame of
the oven cavity. Do not use the
appliance if the door gasket is damaged.
Contact an Authorised Service Centre.
• To clean the door gasket, refer to the
general information about cleaning.
Removing the shelf supports
To clean the oven, remove the shelf
supports.
1.
Pull the front of the shelf support away
from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove it.
2
1
Install the shelf supports in the opposite
sequence.
Aqua cleaning
The Aqua cleaning procedure uses humidity
to help remove remaining fat and food
particles from the oven.
1.
Put 200 ml of water into the cavity
embossment at the bottom of the oven.
2.
Set the True Fan Cooking PLUS
function
.
3.
Set the temperature to 90 °C.
4.
Let the appliance operate for 30
minutes.
5.
Deactivate the appliance and let it cool
down.
6.
When the appliance is cool, clean the
inner surfaces of the oven with a cloth.
WARNING!
Make sure that
the appliance is cool before
you touch it. There is a risk
of burns.
Cleaning the oven door
The oven door has two glass panels. You
can remove the oven door and the internal
glass panel to clean it.
The oven door can close if you
try to remove the internal glass
panel before you remove the
oven door.
CAUTION!
Do not use the
appliance without the internal
glass panel.
1.
Open the door fully and hold the two
door hinges.
Progress
21
